Manualsbrain.com
  1. Manuals
  2. Brands
  3. Toshiba
  4. A10
  5. User Manual

Toshiba A10 User Manual

Download
Page of 245
User’s Manual
G-3
TOSHIBA PC Health Monitor
3. After cleaning the cooling module, run the "TOSHIBA Cooling 
Performance Diagnostic Tool" again. 
Click Start -> All Programs -> TOSHIBA -> Utilities -> TOSHIBA 
Cooling Performance Diagnostic Tool.
4. If the "Please click [OK] to run the TOSHIBA Cooling 
Performance Diagnostic Tool to check the cooling 
performance of your PC." message is still displayed after running 
the "TOSHIBA Cooling Performance Diagnostic Tool" in step 3, it is 
recommended you turn off the computer and contact TOSHIBA support.
Cleaning the cooling module
This section explains how to clean the cooling module.
To clean the cooling module, follow the steps detailed below:
1. Shut down the computer - make sure the Power indicator is off (refer to 
 section in Chapter 1, Getting Started if 
required).
2. Remove the AC adaptor and all cables and peripherals connected to 
the computer.
3. Close the display panel and turn the computer upside down.
4. Remove the battery pack (refer to the 
 
section in Chapter 6, Power and Power-Up Modes, if required).
5. Using a thin-tipped tool, push on the hole in the edge of the Cooling 
module cover and slide it in the direction of the arrow to remove.
Figure G-1 Removing the cooling module cover
6. Lift the plastic film and clean the cooling module using a vacuum 
cleaner or other cleaning tool.
If you use the computer for a long period, the inside of the computer may 
become hot. Always allow the computer to cool to room temperature 
before you clean the cooling module.
Cooling module 
cover
Hole