Lucent Technologies 518-456-151 User Manual
Intercom
Intercom
Ext.
PAGE
Form C4: PARTNER-6 Phone
4 of 8
Check Desired Features
Also write in extension or group number
PAGE
Form C4: PARTNER-6 Phone
4 of 8
Make as many copies as you need. Use template and/or checklist.
For additional instructions, see pages 8 through 13.
For additional instructions, see pages 8 through 13.
Specify Automatic Line Selection: ________________________________________________________________
Identify extensions programmed as shown: ___________________________________________________
04
DEL
IN
IN
SAMPLE
Template Instructions
•
If desired, write in line number, pool access code
†
, dial code feature, or auto dial number
•
If desired, write in Line Ringing (Imm, Del, or No) from Form B2
•
If desired, write in Line Access Restriction or Pool Access Restriction
†
(Out, In, or No) from Form B2
†
Available with ACS R2.0 or later only.
*
In Hybrid mode only, if pool 880 is assigned, these two buttons are associated with this pool.
(ACS R2.0 or later only)
✔
✔
F = Feature button G = Group
I
= Left Intercom button L = Line XX = Extension
Account Code Entry (F 12)
1
ACE
Background Music (F 19)
1
Music
Call Park (
I
XX )
3
Park
Call Pickup (
I
6 XX)
Pickup-XX
Conference Drop (F 06)
Drop
Direct Line Pickup-Active Line (
I
68)
DLPA
Direct Line Pickup-Idle Line (
I
8)
DLPI
Do Not Disturb (F 01)
DND
Exclusive Hold (F 02)
ExHold
Group Calling-Ring/Page (
I
7 G or
I
*7 G)
GCall-g
Group Pickup (
I
66 G)
P/U Grp-g
Last Number Redial (F 05)
LNR
Loudspeaker Paging (
I
70)
Loudspk
Manual Signaling (F 13 XX or F 13 *XX)
1
MS-XX
Message Light Off (F 10 XX)
4
MsgOff-XX
Message Light On (F 09 XX)
4
MsgOn-XX
Privacy (F 07)
Priv
Recall (F 03)
Recall
Save Number Redial (F 04)
SNR
Touch-Tone Enable (F 08)
TT-EN
VMS Cover (F 15)
VMSCover
Voice Interrupt on Busy Talk-Back (F 18)
VIOB
Voice Mail Messages (
I
777)
VMMsgs-777
Call Forwarding/Call Follow-Me (F 11 XX XX)
1,2
CF-XX XX
Call Coverage (F 20 XX XX)
1,2,5
Cover-XX XX
Contact Closure 1 (F 41)
1
CC1
Contact Closure 2 (F 42)
1
CC2
LED
Required
Group Hunt-Ring/Signal (
I
77 G or
I
*77 G)
Hunt-g
Voice Mailbox Transfer (F 14)
VMBox
Fax Management (
I
XX)
1
FAX-XX
Intercom Autodial (
I
XX or
I
*XX)
1
Ext-XX
Station Lock
(F 21)
1
Lock
Simultaneous Paging
(
I
* 70)
SPage
1. Button with
lights is
recommended,
but not
required.
recommended,
but not
required.
2. You can
program the
origination
extension only
or both the
origination and
destination
extension.
origination
extension only
or both the
origination and
destination
extension.
3. Extension
number can be
programmed as
Auto Dial
button.
programmed as
Auto Dial
button.
4. You can
program the
extension
number.
extension
number.
5. Available with
ACS R2.0 or
later only.
later only.