Stovax Electric Stove Range User Manual

5

•  Unplug and allow the heater to cool for 5 - 10 minutes

•  Check the air inlets/outlets for any obstruction and clear,

see Maintenance 

•  Plug in, switch on the fire and the cutout now re-sets

The appliance should function correctly again but if this is not 

the case: 

•  Unplug once more and have the fire checked by a

competent electrician

•  Remove the loose fuels from the glass fibre fuel bed

3.1  If the lamp bulb fails to light you will notice an uneven or 

unlit fuel effect and you can change the lamp:

 

•  Switch off the appliance and isolate it from the mains by

unplugging the unit

•  Wait for at least 10 minutes until the appliance has 
cooled down

•  Unscrew the bulbs

 

To remove the door, glass front and fuel bed and access the 

lamps, choose the instruction corresponding to your model 

from Section 4 below.

AR2160

3.3  CLEANING

 

Only clean the outer casing when it is cold. Do not use 

abrasive cleaners.

 

For painted castings, wipe with a damp cloth and buff with a 

lint free duster.

3.4  CLEANING AIR INLETS

•  Ensure the appliance is unplugged

•  Clean the air inlet and outlet grills regularly with a soft

cloth or the nozzle of a vacuum cleaner

 

Dust build-up can inhibit efficient performance of the fan 

and lead to the safety cut-out operating:

•  Keep the area around the stove clean and free of fluff,

dust or pet hair

•  In particular, build-up of dust etc. can occur around the

heater area under the stove. Take particular care to keep this 

area free from such particles on a regular basis to prevent 

build-up.

3.5  CLEANING LOG MOULDING

•  Make sure the appliance is unplugged

•  Take the log moulding out to clean away from the

 

appliance. Follow Section 4 below to access log  

 

 

moulding

•  Dust off any build-up with a brush or damp cloth -

 

replace