Smeg A3-5 User Manual

Page of 36
 
Instructions for the user 
 
 
 
10.2.4 Burner caps, flame cap crowns and burners 
The burner caps, flame cap crowns and burners are 
extractable to facilitate cleaning. Wash them with hot 
water and non-abrasive detergent, taking care to 
remove incrustation, and leave them to dry 
completely
. Reassemble the burner caps on their 
crowns, ensuring that niches A are centred with 
burner pins B
 
 
10.2.5 Ignition plugs and thermocouples 
To work well, the ignition plugs and thermocouples must 
always be very clean. Check them frequently and clean 
them with a wet rag if necessary. Any dry residue should be 
removed with a toothpick or a needle. 
 
 
10.3  Cleaning of ovens (without self-cleaning panels) 
 
 
 
 
 
To keep an oven in good condition it must be cleaned regularly. Let it 
cool first. Take out all the removable parts. 
In the main oven, remove the shelf runners by unscrewing the ring-nut 
“A” and extract them from the runner “B” by pulling outward. (Fig. 1) 
In the auxiliary oven, remove the shelf runners by lifting them at the front 
and extracting them from their rear holes. (Fig. 2) 
 
 
 
 
• 
Clean the oven grill and side guides with hot water and non-abrasive 
detergent. Rinse and dry. 
• 
Clean the internal walls of the oven with a soft ammoniac-soaked 
cloth. Rinse and dry. If there are still stains or drops, place a damp 
ammoniac-soaked cloth on the bottom of the oven, close the door 
and after a few hours wash the oven with hot water and liquid 
detergent. Rinse and dry.  
 
 
 
10.3.1 Self-cleaning 
liners 
73