Hearth & Home Technologies be-36-c User Manual

Hearth & Home Technologies   •  BE-36-C, BE-36-CIPI  •  397-981 Rev. V  1/07

44

If installing Intellifi re ignition battery backup:
•  Do not install batteries if the backup mode may not be 

used for extended time.

•  Batteries may leak.
•  Install batteries only when needed for power outage.

Before operating this appliance have a qualifi ed tech-
nician:
•  Remove all shipping materials from inside and/or 

underneath the fi rebox.

•  Review proper placement of logs, rockwool, lava 

rock, and vermiculite.

•  Check the wiring.
•  Check the air shutter adjustment.
•  Ensure that there are no gas leaks.
•  Ensure that the glass is sealed and in the proper 

position.

•  Ensure that the fl ow of combustion and ventilation air 

is not obstructed (front grilles and vent caps).

HOT! DO NOT TOUCH. 
SEVERE BURNS MAY RESULT.
CLOTHING IGNITION MAY RESULT.

Glass and other surfaces are hot during operation and 
cool down.

•  Keep children away. 

 

 

 

•  CAREFULLY SUPERVISE children in same room 

as appliance.

•  Alert children and adults to hazards of high 

temperatures.

•  Do NOT operate with protective barriers open or 

removed.

•  Keep clothing, furniture, draperies and other 

combustibles away.

This appliance has been supplied with an integral barrier to 
prevent direct contact with the fi xed glass panel. Do NOT 
operate the appliance with the protective barrier removed.
Contact your dealer or Hearth & Home Technologies if the 
barrier is not present or help is needed to properly install one.

Improper installation, adjustment, alteration, service or 
maintenance can cause injury or property damage. Refer to 
the owner’s information manual provided with this appliance. 
For assistance or additional information consult a qualifi ed 
installer, service agency or the gas supplier.

Do NOT use this appliance if any part has been under water.  
Immediately call a qualifi ed service technician to inspect the 
appliance and to replace any part of the control system and 
any gas control which has been under water.

Glass door must be in place when appliance 

is operating.
Risk of:

• Combustion Fumes

• Fire

Do NOT operate appliance with glass door 

removed. 
•  Open viewing glass for servicing only.

•  Glass door MUST be in place and sealed before operating 

appliance.

•  Only use glass door certifi ed for use with appliance.
•  Glass replacement should be done by qualifi ed technician.

Before lighting this appliance determine if it has a Standing 
Pilot or Intellifi re ignition system by opening the control 
access panel to view wiring system and gas valve. If this 
appliance has a red or black ignitor button (see Figure 
10.1) this appliance has a Standing Pilot ignition system. 
If there is no red or black ignitor button, this appliance has 
an Intellifi re ignition system.