GE JDP39DNCC Leaflet

For answers to your Monogram,

GE Profile

™

appliance questions, visit our website at

ge.com or call GE Answer Center

service,

800.626.2000.

All GE ranges are equipped with

an Anti-Tip device. The installation

of this device is an important,

required step in the installation

of the range.

Listed by

Underwriters

Laboratories

JDP39DN

30" Drop-In Electric Range with Self-Cleaning Oven

Dimensions and Installation Information

Note: Cabinets installed adjacent to drop-in
ranges must have an adhesion spec of at
least 194°.
Important
30” Drop-In Ranges are designed to hang from
the countertop. It does not rest on the floor.
For installation alternatives, refer to installation
instructions packed with product.
Note: 30” Drop-In Electric Ranges conform to
U.L. requirements for 3” minimum spacing between
range and side walls above countertop.
Installation Information: Before installing,
consult installation instructions packed with
product for current dimensional data.

Acceptable Electrical Outlet

Area Also In Adjacent

Cabinet Or Under Floor

Conduit is 40" long

Shave Raised Edge To Clear

31-1/8" Wide Control Panel

Excluding Models JDS28 and JDP39

9/16

30" Min.

18" Min.

6" Min.

from walls

7-1/2

2-7/8"

To Front Surface

of Countertop

27-1/2

23-3/16

If necessary,

build upsides

to 1-1/4" thick

to provide

countertop

support

26-1/2**

20-5/8" Door

Clearance

From Front

Surface of

Countertop

31-1/4

A/B*

Accessory

Backguard

*JXS37 is 5-1/4" and JXS32 is 4"

(excluding handle)

**Total depth from wall to

front of closed oven door

including handle is 29-1/2.