Liebherr 110309 7084282 - 01 User Manual

u

Pull out the mains plug (not by pulling the connecting cable)

or switch off the fuse.

Your appliance is designed and manufactured for a long life span

and reliable operation. If a malfunction nonetheless occurs dur-

ing operation, check whether it is due to a handling error. In this

case you will have to be charged for the costs incurred, even

during the warranty period. You may be able to rectify the follow-

ing faults yourself:
Appliance does not work.

→

The appliance is not switched on.

u

Switch on the appliance.

→

The power plug is not properly inserted in the wall socket.

u

Check power plug.

→

The fuse of the wall socket is not in order.

u

Check fuse.

→

The compressor switches to a low speed when little cold is

needed. Although the running time is increased as a result,

energy is saved.

u

This is normal in energy-saving models.

→

SuperFrost is activated.

u

The compressor runs for longer in order to rapidly cool the

food. This is normal.

→

SuperCool is activated.

u

The compressor runs for longer in order to rapidly cool the

food. This is normal.

→

This noise comes from the refrigerant flowing in the refriger-

ation circuit.

u

The sound is normal.

→

The noise is produced whenever the refrigeration unit (motor)

automatically switches on or off.

u

The sound is normal.

→

The  refrigeration  increases  automatically  when  the  Super-

Frost, function is activated, fresh food has just been placed

in the appliance or the door has been left open for a while.

u

The sound is normal.

→

The  refrigeration  increases  automatically  when  the  Super-

Cool function is activated, fresh food has just been placed in

the appliance or the door has been left open for a while.

u

The sound is normal.

→

The ambient temperature is too high.

u

→

The appliance is not standing firmly on the floor. As a result,

adjoining units or objects are set into vibration by the running

refrigeration unit.

u

Move bottles and containers apart.

→

The noise is produced when the door is opened and closed.

u

The sound is normal.

The temperature display indicates: F0 to F5.

→

There is a fault.

u

Contact the customer service  (see Maintenance).

The temperature display indicates: nA

→

The freezer temperature rose too high over the last hours or

days due to a power failure or power interruption. When the

power interruption is over, the appliance will continue to op-

erate in the last temperature setting.

u

alarm button

 Fig. 2 (1)

Press

w

The warmest temperature reached during the power failure

will appear in the temperature display for about 60 s. After that,

the actual temperature in the freezer will re-appear.

u

To prematurely cancel the display of the warmest tempera-

ture: press alarm button

 Fig. 2 (1)

.

u

Check the quality of the food. Do not consume spoiled food.

Do not re-freeze thawed food.

→

The appliance and therefore the IceMaker are not connected.

u

Connect the appliance. (see Putting into operation).

→

The IceMaker is not switched on.

u

Switch on the IceMaker.

→

The drawer of the IceMaker is not properly closed.

u

Close the drawer properly.

→

The water connection is not open.

u

Open the water connection.

→

The door of the appliance is not properly closed.

u

Close the door of the appliance.

→

Insufficient ventilation.

u

Clear ventilation grilles.

→

The ambient temperature is too high.

u

→

The appliance was opened too frequently or for too long.

u

Wait until the appliance reaches the required temperature it-

self.  If  not,  contact  the  customer  service.    (see  Mainte-

nance).

→

Too much fresh food was placed inside without SuperFrost.

u

→

The temperature is incorrectly set.

u

Set to a colder temperature and check after 24 h.

→

The appliance is too close to a heat source.

u

Solution:  (see Putting into operation).

→

The appliance is not switched on.

u

Switch on the appliance.

→

The door was open longer than 15 min.

u

The interior light automatically switches off if the door has

been open for about 15 min.

→

The LED interior lighting is faulty or the cover is damaged:

Risk of injury due to electric shock!

Live parts are located under the cover.

u

Have the LED interior light changed or repaired only by the

customer service or by specialized personnel trained for the

purpose.

Danger of injury due to laser radiation, class 1M.

u

Do not look inside when the cover is open.

→

The LED freezer compartment lighting does not shine.*

u

You can change the light unit yourself. The spare part is avail-

able from the customer service  (see Maintenance).*