GE GTR10HAX User Manual

Using a putty knife with the edge covered with
masking tape, remove the plug buttons. Be careful 
of the paint finish.

Reinstall the plug button on the right side by inserting 
it into the holes vacated by the top hinge screws.

Reassemble the top hinge and shim on the left side,
turning the screws just enough to hold the hinge 
in place.

Tape the door shut with masking tape.

Remove the center hinge and shim by removing 
the screws (some models have lock washers with 
each screw). Lift up the hinge to remove it.

NOTE: Some models have a washer between 
the center hinge and the top of the fresh food door. 
Do not lose.

Remove the tape holding the door shut.

Lift the fresh food door up and off the bottom hinge.

Set the door outside-up on a non-scratching surface.

NOTE: When removing the door, watch for washer(s)
between the bottom hinge and the bottom of the fresh
food door that may stick to the door. Do not lose.

Do not let door drop 

to the floor. To do so could damage the door stop.