GE GTR10HAX User Manual
Preparing for Vacation
For long vacations or absences, remove food
and unplug the refrigerator. Clean the interior
with a baking soda solution of one
tablespoon (15 ml) of baking soda to one
quart (1 liter) of water. Leave the doors open.
and unplug the refrigerator. Clean the interior
with a baking soda solution of one
tablespoon (15 ml) of baking soda to one
quart (1 liter) of water. Leave the doors open.
Preparing to Move
Secure all loose items such as shelves and
drawers by taping them securely in place
to prevent damage.
drawers by taping them securely in place
to prevent damage.
Be sure the refrigerator stays in an upright
position during moving.
position during moving.
Consumer S
uppor
t
Tr
oubleshooting Tips
Operating Instructions
Safety Instructions
Installation
Instructions
7
ge.com
Replacing the Light Bulb
Moving the control to COLD does not remove
power to the light circuit.
power to the light circuit.
The bulb is located behind the shield
in the back wall.
in the back wall.
Unplug the refrigerator.
Remove the shelves (if necessary).
Remove the screw.
Gently remove the light shield by
inserting a flat head screwdriver
into the slot at the top of the shield
and pop it off.
inserting a flat head screwdriver
into the slot at the top of the shield
and pop it off.
Replace the bulb with an appliance
bulb of the same or lower wattage.
bulb of the same or lower wattage.
Insert the tab at the bottom of the light
shield into the light bulb housing and
snap into place.
shield into the light bulb housing and
snap into place.
Replace the screw.
Replace the shelves if removed.
Plug in the refrigerator.
10’ Refrigerator Light Location
12’ Refrigerator Light Location
Bulb
Cover
Screw
Hole
Bulb
Cover
Screw
Hole