GE 11 User Manual
Preparing for Vacation
For long vacations or absences, remove
food and unplug the refrigerator. Move
the control to the OFF position, and clean
the interior with a baking soda solution
of one tablespoon (15 ml) of baking soda
to one quart (1 liter) of water. Leave the
doors open.
food and unplug the refrigerator. Move
the control to the OFF position, and clean
the interior with a baking soda solution
of one tablespoon (15 ml) of baking soda
to one quart (1 liter) of water. Leave the
doors open.
Preparing to Move
Secure all loose items such as shelves and
drawers by taping them securely in place
to prevent damage.
drawers by taping them securely in place
to prevent damage.
Be sure the refrigerator stays in an upright position
during moving.
during moving.
Consumer Support
Tr
oubleshooting T
ips
Operating Instructions
Safety Instructions
Installation Instructions
7
ge.com
Replacing the Light Bulb
Moving the control to OFF does not remove power
to the light circuit.
to the light circuit.
The bulb is located behind the shield next
to the control.
to the control.
Unplug the refrigerator.
Remove the screw.
Push in near the top of the shield
and rotate down and out.
and rotate down and out.
Replace the bulb with an appliance
bulb of the same or lower wattage
(40 Watt maximum).
bulb of the same or lower wattage
(40 Watt maximum).
Insert the tabs at the bottom of the
light shield with the slots in the bulb
housing.
light shield with the slots in the bulb
housing.
Rotate the shield up until the tabs at
the top of the shield pop into place
in the bulb housing.
the top of the shield pop into place
in the bulb housing.
Replace the screw.