Viking FWCI1240GR User Manual
13
12
Interior Light
Interior Light
The unit is equipped with an interior light that is illuminated
when the door is opened. The cabinet also comes standard
with a display light function located on the control panel for
displaying your products through a glass door. To use display
lighting, press the Light button. The light icon on the display
will go from flashing to continuous. Do not use the display
light function with a solid door product. If the display light is
left on for an extended period of time, it may increase the
cabinet temperature, especially at the top and cause the
refrigeration system to run longer. To turn off display lighting,
open door and press the Light button. The light icon on the
display will go from continuous to flashing.
when the door is opened. The cabinet also comes standard
with a display light function located on the control panel for
displaying your products through a glass door. To use display
lighting, press the Light button. The light icon on the display
will go from flashing to continuous. Do not use the display
light function with a solid door product. If the display light is
left on for an extended period of time, it may increase the
cabinet temperature, especially at the top and cause the
refrigeration system to run longer. To turn off display lighting,
open door and press the Light button. The light icon on the
display will go from continuous to flashing.
Light Bulb Replacement
NOTE: Please contact your Viking Range parts distributor or
dealer to order the LED light bulb.
dealer to order the LED light bulb.
To replace light bulb, unscrew the bulb counterclockwise and
replace with new bulb.
replace with new bulb.
Checking Product Temperature
To accurately check the temperature of the product stored in a
refrigerated compartment, insert an accurate thermometer into
a plastic (non-breakable) bottle, partially filled with water.
Tighten the bottle cap securely.
refrigerated compartment, insert an accurate thermometer into
a plastic (non-breakable) bottle, partially filled with water.
Tighten the bottle cap securely.
Place the bottle in the desired area for 24 hours. Refrain from
opening the unit during the testing period. After 24 hours,
check the temperature of the water. Adjust the control settings
if necessary and re-test.
opening the unit during the testing period. After 24 hours,
check the temperature of the water. Adjust the control settings
if necessary and re-test.
Your units are pre-set in order to achieve the recommended
temperature range when installed in a 70°F ambient room
temperature. Factors, which affect the internal temperatures of
the refrigerated cabinet, include:
temperature range when installed in a 70°F ambient room
temperature. Factors, which affect the internal temperatures of
the refrigerated cabinet, include:
• Temperature setting
• Room temperature where installed
• Number of times the door is opened and closed
• Length of times the door is opened and closed
• Length of times the door is left open
• Style of door installed
• Door gasket sealing and condition
• Amount of time the internal light is illuminated
• Installation in direct sun light or near a heat source
• Room temperature where installed
• Number of times the door is opened and closed
• Length of times the door is opened and closed
• Length of times the door is left open
• Style of door installed
• Door gasket sealing and condition
• Amount of time the internal light is illuminated
• Installation in direct sun light or near a heat source