Magikitch'n pmn User Manual
MKG SERIES GAS GRIDDLE INSTALLATION & OPERATION
i
THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE
TO THE PURCHASER
Post in a prominent location the
instructions to be followed in the event that
an operator smells gas. Obtain this
information from your local gas supplier.
instructions to be followed in the event that
an operator smells gas. Obtain this
information from your local gas supplier.
WARNING
There is an open flame inside this
appliance. The unit may get hot enough to
set nearby materials on fire. Keep the area
around the appliance free from
combustibles.
appliance. The unit may get hot enough to
set nearby materials on fire. Keep the area
around the appliance free from
combustibles.
WARNING
DO NOT
supply the appliance with a gas
that is not indicated on the data plate. If
you need to convert the appliance to
another type of fuel, contact your dealer.
you need to convert the appliance to
another type of fuel, contact your dealer.
WARNING
DO NOT
use an open flame to check for
gas leaks!
WARNING
If gas flow to appliance is interrupted, or pilots
extinguish, wait 5 minutes before attempting to
relight the pilot to allow any residual gas in
appliance to dissipate.
extinguish, wait 5 minutes before attempting to
relight the pilot to allow any residual gas in
appliance to dissipate.
WARNING
Ensure that the appliance can get enough air to
keep the flame burning correctly. If the flame is
starved for air, it can give off a dangerous carbon
monoxide gas. `Carbon monoxide is a clear
odorless gas that can cause suffocation.
keep the flame burning correctly. If the flame is
starved for air, it can give off a dangerous carbon
monoxide gas. `Carbon monoxide is a clear
odorless gas that can cause suffocation.
WARNING
An appliance equipped with casters and a flexible
gas line must be connected to the gas supply with
a quick disconnect device. This quick disconnect
must comply with ANSI Z24.41. To limit the
movement of the appliance without depending on
the connector or quick disconnect, a restraining
cable must also be installed.
gas line must be connected to the gas supply with
a quick disconnect device. This quick disconnect
must comply with ANSI Z24.41. To limit the
movement of the appliance without depending on
the connector or quick disconnect, a restraining
cable must also be installed.
WARNING
Models with electric controls are equipped with
an oil proof electrical supply cord, with a three-
prong safety plug. This is to protect operators
from electrical shock hazard in the event of an
equipment malfunction. DO NOT cut or remove
the grounding (third) prong from this plug.
an oil proof electrical supply cord, with a three-
prong safety plug. This is to protect operators
from electrical shock hazard in the event of an
equipment malfunction. DO NOT cut or remove
the grounding (third) prong from this plug.
WARNING
This appliance, when installed, must be
electrically grounded in accordance with local
codes, or in the absence of local codes, with the
National Electrical Code, ANSI/NFPA 70, or the
Canadian Electrical Code, CSA C22.2, as
applicable.
electrically grounded in accordance with local
codes, or in the absence of local codes, with the
National Electrical Code, ANSI/NFPA 70, or the
Canadian Electrical Code, CSA C22.2, as
applicable.
WARNING
The power supply must be disconnected before
servicing or cleaning this appliance.
servicing or cleaning this appliance.
WARNING
Do not attempt to move this appliance when the
unit is at operating temperature. Serious personal
injury could result if skin comes in contact with
the hot surfaces.
unit is at operating temperature. Serious personal
injury could result if skin comes in contact with
the hot surfaces.
FOR YOUR SAFETY
DO NOT store or use gasoline or other flammable vapors or liquids in the vicinity of
this or any other appliance.
this or any other appliance.
WARNING
Improper installation, alteration, service or maintenance can cause property damage,
injury or death. Read the installation, operating and maintenance instructions
thoroughly before installing or servicing this equipment.
injury or death. Read the installation, operating and maintenance instructions
thoroughly before installing or servicing this equipment.