Viking DMOC205SS User Manual
25
DMOC205SS
VMOC205SS
VMOC205SS
Pin No.
Signal
I/O
Description
18
P50
OUT
Damper motor relay driving signal.
To turn on and off shut-off relay(RY4).
19
P47
OUT
Heating element driving signal.
To turn on and off shut-off relay(RY3). "L" level
during convection cooking; "H" level otherwise.
During convection cooking, the signal becomes "H"
level when the temperature of the oven cavity
exceeds the predetermined temperature.
To turn on and off shut-off relay(RY3). "L" level
during convection cooking; "H" level otherwise.
During convection cooking, the signal becomes "H"
level when the temperature of the oven cavity
exceeds the predetermined temperature.
20-21
P46-P45
OUT
Terminal not used.
22
P44
OUT
Timing signal output terminal for temperature measurement(OVEN THERMIS-
TOR).
TOR).
"H" level (GND) : Thermistor OPEN timing.
"L" level (-5V) : Temperature measuring timing.(Convection cooking)
"L" level (-5V) : Temperature measuring timing.(Convection cooking)
23
P43
OUT
Signal to sound buzzer.
A: key touch sound.
B: Completion sound.
C: When the temperature of the oven
cavity reaches the preset temperature
in the preheating mode, or when the
preheating hold time (30 minutes) is
elapsed.
in the preheating mode, or when the
preheating hold time (30 minutes) is
elapsed.
24
P42
OUT
Timing signal output terminal for temperature measurement(OVEN).
"H" level (GND) : Thermistor OPEN timing.
"L" level (-5V) : Temperature measuring timing.(Convection cooking)
"L" level (-5V) : Temperature measuring timing.(Convection cooking)
25
INT1
IN
Signal to synchronize LSI with commercial power source frequency.
This is the basic timing for all real time
processing of LSI.
processing of LSI.
26
P40
IN
Connected to GND.
27
RST
IN
Auto clear terminal.
Signal is input to reset the LSI to the initial state when power is applied. Temporarily
set to "L" level the moment power is applied, at this time the LSI is reset. Thereafter
set at "H" level.
Signal is input to reset the LSI to the initial state when power is applied. Temporarily
set to "L" level the moment power is applied, at this time the LSI is reset. Thereafter
set at "H" level.
28/29
XCIN/XCOUT
OUT
Terminal not used.
30
XIN
IN
Internal clock oscillation frequency setting input.
The internal clock frequency is set by inserting the ceramic filter oscillation circuit with
respect to XOUT terminal.
The internal clock frequency is set by inserting the ceramic filter oscillation circuit with
respect to XOUT terminal.
31
XOUT
OUT
Internal clock oscillation frequency control output.
Output to control oscillation input of XIN.
Output to control oscillation input of XIN.
32
VSS
IN
Power source voltage: -5V.
VC voltage of power source circuit input.
VC voltage of power source circuit input.
33
P27
IN
Signal coming from touch key.
When any one of G-1 line keys on key matrix is touched, a corresponding signal from
P10 - P17 will be input into P27. When no key is touched, the signal is held at "L" level.
When any one of G-1 line keys on key matrix is touched, a corresponding signal from
P10 - P17 will be input into P27. When no key is touched, the signal is held at "L" level.
34
P26
IN
Signal similar to P27.
When any one of G-2 line key on key matrix is touched, a corresponding signal will
be input into P26.
When any one of G-2 line key on key matrix is touched, a corresponding signal will
be input into P26.
35
P25
IN
Signal similar to P27.
When any one of G-3 line key on key matrix is touched, a corresponding signal will
be input into P25.
When any one of G-3 line key on key matrix is touched, a corresponding signal will
be input into P25.
36
P24
IN
Signal similar to P27.
When any one of G-4 line key on key matrix is touched, a corresponding signal will
be input into P24.
When any one of G-4 line key on key matrix is touched, a corresponding signal will
be input into P24.
ON
OFF
H : GND
L
ON
OFF
During
cooking
L
GND
H.
(Convection)
P03
ß(60Hz)
H
L
GND
VP
P02
P01
P00
P37
P36
P35
P55
16.7 msec.
H : GND
L (-5V)