APC Rack ATS, 230V, 32A, IEC309 in, (16)C13 (2)C19 out AP7724 Leaflet
Product codes
AP7724
Automatic Transfer Switch
Overview
The American Power Conversion (APC
®
) Rack Automatic Transfer Switch (ATS) provides reliable,
redundant power to single-corded equipment. The Rack ATS has dual input power cords supplying
power to the connected load. If the primary source becomes unavailable, the Rack ATS will
seamlessly source power from the secondary source without interrupting critical loads. Networked
units have built-in network connectivity, which allows for remote management via Web, SNMP, or
Telnet interfaces.
power to the connected load. If the primary source becomes unavailable, the Rack ATS will
seamlessly source power from the secondary source without interrupting critical loads. Networked
units have built-in network connectivity, which allows for remote management via Web, SNMP, or
Telnet interfaces.
Rear view—AP7724
Item
Description/Function
Power cords
The two cords connect the ATS to two separate power
sources (A, B). The switch draws power from the preferred
source and automatically switches to the secondary source
when necessary. The two (2) 2.44-m (8-ft) power cords
have IEC-309 32 A plugs.
sources (A, B). The switch draws power from the preferred
source and automatically switches to the secondary source
when necessary. The two (2) 2.44-m (8-ft) power cords
have IEC-309 32 A plugs.
Outlets
The outlets connect the ATS to equipment in the rack or
enclosure, providing a redundant source of power to the
connected equipment. Each switch has sixteen (16) C13
outlets and two (2) C19 outlets.
enclosure, providing a redundant source of power to the
connected equipment. Each switch has sixteen (16) C13
outlets and two (2) C19 outlets.
Circuit breakers
The ATS is protected by two (2) 16 A single-pole circuit
breakers.
breakers.
pd
u0
386
a