GE ZSC1201SS User Manual

This product requires a 120-volt, 60 Hz, 15-amp circuit
and draws 1.8 kilowatts. This product must be
connected to a supply circuit of the proper voltage
and frequency. 
• Wire size must conform to the requirements of the

National Electrical Code or the prevailing local code
for this kilowatt rating.

• The power supply cord and plug should be brought

to a separate 15 or 20 ampere branch circuit single
grounded receptacle. The outlet box should be
located within reach of the 48" power cord.

IMPORTANT: (Please read carefully).

The power cord of this appliance is equipped with 
a three-prong (grounding) plug that mates with 
a standard three-prong grounding wall receptacle 
to minimize the possibility of electric shock. The
customer should have the wall receptacle and 
circuit checked by a qualified electrician to make 
sure the receptacle is properly grounded and has 
the correct polarity. 
• Where a standard two-prong wall receptacle is

encountered, it is the personal responsibility and
obligation of the consumer to have it replaced with 
a properly grounded three-prong wall receptacle. 

Do not, under any circumstances, cut or remove 
the third (ground) prong from the power cord.

Install a recessed electrical outlet in the back wall
of the opening within 6

″ of either side and at least

9

″ above the cutout floor.

Locate outlet box in the shaded area

6”

9”