Smeg A31X-6 User Manual

 

 

Starting cooking: as well as setting a cooking duration, the cooking start 
time can also be set (with a maximum delay of 12 hours from the current 
time). To set the cooking start/end time, proceed as follows: 

- 

Set the cooking duration as described in the previous point. 

- 

Within 6/7 seconds of the last pressure on the 

 or 

 keys, press 

the 

 key again to set the cooking start time. The current time will 

appear on the display with internal segments illuminated to show the 

end of cooking time. Use the  

 and 

 keys to set the cooking 

start time. 

- 

6/7 seconds after the last key is pressed, the display will show the 
current time and the cooking start and end times, which will be 
represented by the illuminated inside segments. The display 
segments will be constantly illuminated as long as the current time is 
not the same as the cooking start time; as soon as the current time 
reaches the set starting time, all the inside segments will start to 
flash, indicating that the oven has started cooking. 

- 

At the end of the cooking time the timer will switch the oven heating 
elements off, the beeps will start to sound and the numbers on the 
dial will flash. 

- 

To reset the whole program set, keep the central key 

 pressed for 

1 or 2 seconds: if cooking has already started, the oven will have to 
be switched off by hand. 

- 

Here we can see a programming example: the 
current time is 7:06 and cooking is programmed to 
start at 8:00 and end at 9:00. 

- 

At 8 o'clock the inside segments between 8 and 9 
will start to flash, while the hours hand will remain 
still. 

 

Caution: for the oven to start cooking operations after the 
programming procedures just described, the thermostat and 
function selector knob must correctly set on the temperature and 
function required. 
 
5.2.4

Models with analogue/digital programmer feature a "DEMO" function 
which deactivates the heating elements while leaving the other functions 

unchanged. To activate it, simply press the 

, 

, and 

 keys for 3/4 

seconds. A confirmation beep will inform the user that the function is 
active. To deactivate it, simply repeat the same procedure.