Gaggenau BS 474 User Manual

Note: The appliance is heavy. It is advisable to insert 
it together with a second person.

NOTICE: Before installing the oven, be sure to verify 
the cabinet dimensions and electrical connections.

Use the included retaining plate and two screws to 
fasten on the side bottom of the hinge side in the 
installation cabinet. Mark the screw midpoint, the 
retaining plate must be positioned precisely. 
Depending on the installation situation, on partition 
floor or heating drawer WS4.., turn the retaining plate 
by 180°. When pushed into the cupboard, the 
appliance snaps into the retaining plate.

Secure the appliance against tilting in the cupboard if 
there is not intermediate shelf above the appliance: 
fasten two commercially available brackets on both 
sides inside the cupboard (at 17 

3

/

4

" (450 mm) deep, 

3

/

16

" (5 mm) above appliance height).

Push the appliance fully into the kitchen unit. 
Route the Combi-steam oven's connecting cable 
and supply and drain water hoses to the 
connection points on the rear left in the kitchen 
unit. 

Do not kink or jam connecting cables and hoses 
or route them over sharp edges.

Align the appliance in the center.
An air gap of 

3

/

16

" (5 mm) is required between the 

appliance and adjoining furniture frontages.

ƒ

ƒ

PLQ