Smeg SCP111NE1 User Manual

•  Check the mains power supply.
• Check whether an omnipolar switch

upstream from the oven feed line is in the
“ON” position.

•  Check whether the “showroom” mode has

been set, for further details see paragraph
“Secondary menu” on page 55.

•  Check whether the “child lock-out function”

mode has been set, for further details see
paragraph “Secondary menu” on page 55.

•  Check whether the “2300 W” mode has been

set, for further details see paragraph
“Secondary menu” on page 55.

•  Verify whether the interlock device has

switched off. If it has not, the oven has a
protection device that does not allow
functions to be selected while the interlock
device is active. This is because the
temperatures inside the oven are still too
high to permit any type of cooking.

The display shows 
ERR 4
(on pyrolytic models 
only)

•  The interlock device has not hooked up to

the door properly.  These might be because
the door was accidentally opened during its
activation. Switch off the oven and switch it
on again waiting a few minutes before
selecting a new cleaning cycle.

•  This is not a fault.  It is a normal operation of

the appliance, useful when cooking foods in
order to avoid excessive heat escaping.
When the door is closed, the oven will return
to normal operation.

If the problem has not been resolved or for other types of faults, contact
your local technical assistance centre.