Smeg KE455X User Manual

 

 

Cooking start: as well as setting a cooking duration time, the user can 
also set the cooking start time (up to 12 hours after the current time). To 
set the cooking start/end time, proceed as follows. 
 

- 

Set the cooking duration time as described in the previous point. 

- 

Within 6/7 seconds after the last time the 

 or 

 keys are pressed, 

press the 

 key to set the cooking start time. The display will show 

the current time with the inside segments indicating the cooking end 

time illuminated. Use the 

 and 

 keys to set the cooking start time. 

- 

6/7 seconds after the last time a key is pressed, the display will show 
the current time and the cooking start and end times, indicated by the 
illuminated inside segments.  The segments on the display will be 
constantly on until the current time is the same as the cooking start 
time; as soon as the current time reaches the cooking start time set, 
all the inside segments will start to flash, indicating that the oven has 
started cooking. 

- 

When the end of the cooking time is reached, the timer will switch off 
the oven heating elements, the beeps will start and the numbers on 
the dial will flash. 

- 

To reset the entire program set, keep the central key 

 pressed for 1 

or 2 seconds: if cooking has already started the oven will have to be 
switched off by hand. 

- 

The image on the right shows an example of 
programming: the current time is 7.06 and 
cooking is programmed to start at 8 o'clock and 
finish at 9. 

- 

At 8 o'clock, the inside segments between 8 and 
9 will start to flash and the hour pointer will 
remain still. 

 

Caution: for the oven to start cooking after the programming procedure 
just described, the thermostat and function selector must be properly set 
on the temperature and function required.