Smeg AP420X User Manual
Instructions for the user
41
3.2.7
Minute-counter
The programmer can also be used as a simple minute counter.
The use of the minute-counter will not interrupt oven operation at the end
of the set time.
of the set time.
By pressing key , the display shows
; keep the key pressed and
at the same time press keys or . By releasing the key , the
programmed count starts and the symbols and appear on the
monitor.
programmed count starts and the symbols and appear on the
monitor.
After programming the minute-counter, the display will show the right
time. to display remaining time, press key .
time. to display remaining time, press key .
Wrong settings are prevented logically (e.g., any conflict between end of
cooking time and a longer time will not be accepted by the programmer).
cooking time and a longer time will not be accepted by the programmer).
3.2.8
Cancellation of set data
Once the programme has been set, keep the key of the function to be
cancelled pressed, while at the same time
cancelled pressed, while at the same time
is reached by means of
variation keys or . Time cancellation will be considered as end-of-
cooking time by the programmer.
cooking time by the programmer.
3.2.9
Changing the set data
The cooking data entered can be changed at any time by keeping the
function key pressed and at the same time adjusting the keys or .
function key pressed and at the same time adjusting the keys or .
4. USE OF THE OVEN
Before using the oven make sure that the electronic programmer displays
the symbol (see "3.2.1 Clock adjustment").
the symbol (see "3.2.1 Clock adjustment").