Pitco Frialator L20-281 User Manual

Page of 20
THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE 
 
 
 
 
FOR YOUR SAFETY 
DO NOT store or use gasoline or other flammable vapors or liquids in the vicinity of 
this or any other appliance. 
 
 
 
WARNING 
Improper installation, alteration, service or maintenance can cause property damage, 
injury or death. Read the installation, operating and maintenance instructions 
thoroughly before installing or servicing this equipment. 
 
TO THE PURCHASER 
Post in a prominent location the instructions 
to be followed in the event that an operator 
smells gas. Obtain this information from 
your local gas supplier. 
 
WARNING 
There is an open flame inside this appliance. 
The unit may get hot enough to set nearby 
materials on fire. Keep the area around the 
appliance free from combustibles. 
 
WARNING 
DO NOT
 supply the appliance with a gas 
that is not indicated on the data plate. If you 
need to convert the appliance to another 
type of fuel, contact your dealer. 
 
WARNING 
DO NOT 
use an open flame to check for 
gas leaks! 
 
WARNING 
If gas flow to appliance is interrupted, or pilots 
extinguish, wait 5 minutes before attempting to 
relight the pilot to allow any residual gas in 
appliance to dissipate. 
 
WARNING 
Ensure that the appliance can get enough air to 
keep the flame burning correctly. If the flame is 
starved for air, it can give off a dangerous carbon 
monoxide gas. Carbon monoxide is a clear 
odorless gas that can cause suffocation. 
 
WARNING 
 
Adequate means must be provided to limit the 
movement of this appliance without depending on 
the gas line connection. Single appliances 
equipped with legs must be stabilized by installing 
anchor straps. All appliances equipped with 
casters must be stabilized by installing restraining 
chains. If a flexible gas line is used, an additional 
restraining cable must be connected at all times 
when the appliance is in use. 
 
WARNING 
An appliance equipped with casters and a flexible 
gas line must be connected to the gas supply with 
a quick disconnect device. This quick disconnect 
must comply with ANSI Z24.41. To limit the 
movement of the appliance without depending on 
the connector or quick disconnect, a restraining 
cable must also be installed. 
 
WARNING 
Models with electric controls are equipped with an 
oil proof electrical supply cord, with a three-prong 
safety plug. This is to protect operators from 
electrical shock hazard in the event of an 
equipment malfunction. DO NOT cut or remove the 
grounding (third) prong from this plug. 
 
WARNING 
This appliance, when installed, must be electrically 
grounded in accordance with local codes, or in the 
absence of local codes, with the National Electrical 
Code, ANSI/NFPA 70, or the Canadian Electrical 
Code, CSA C22.2, 
as applicable. 
 
WARNING 
The power supply must be disconnected before 
servicing or cleaning this appliance. 
 
WARNING 
Do not attempt to move this appliance when the 
unit is at operating temperature. Serious personal 
injury could result if skin comes in contact with the 
hot surfaces. 
 
WARNING
 
DO NOT sit or stand on this appliance. Serious 
injury could result from falling or contact with hot 
shortening/oil.