Audio-Technica AT-MX381 User Manual

 
 

The software can configure the following channel functions: 

 

Copy Channel Information (CH1 CP) button 
Clicking this button copies channel one’s settings to the other 
seven channels

. 

 
INPUT ATT 
Allows selection between 0 dB (MIC) and –35 dB (LINE) level 
inputs. 
 
(Note: if LINE is selected, Phantom will be grayed out and if 
PHANTOM is on, LINE will be grayed out.) 
 
PHANTOM 
Turns 48V phantom power on or off. 
 
PRIORITY 
Sets the channel’s priority status. 
 
LOW FREQ CUT 
Turns on the channel’s roll-off filter to minimize mechanical or 
other low-frequency noise. 
 
FORCE ON 
Allows channel to turn on, when external contact closure is 
activated, overriding any priority settings. 
 
Note:  Force on/off settings from external contact closure will 
override force on/off settings from PC.   
 
FORCE OFF 
Allows channel to turn off when external contact closure is 
activated, overriding any priority settings. 
 
GATE ATT 
When a channel is closed, its output is not entirely cut off, but 
attenuated.  GATE ATT sets the amount of attenuation when the 
channel gate is closed (channel is off).  
 
DIRECT OUTPUT 
Allows the signal on each channel to appear on the Direct Out 
terminal before or after the channel’s gate. 
 
INITIALIZE 
Clicking these buttons sets a channel or all channels to factory default settings. 
 
Note: when any of the INITIALIZE or CH1 CP buttons are clicked, a confirmation box appears, clicking OK 
begins the process. During the process, a blue progress bar appears in the rectangle in the windows lower 
left corner.