Avanti WCR682SS Product Manual

Page of 22
 
IMPORTANT SAFEGUIDES
 
 
 
                              Before the appliance is used, it must be properly positioned and installed as  
described in this manual , so read the manual carefully. To reduce the risk of fire,  
electrical shock or injury when using the  appliance, follow basic precaution,   
including the following: 
 
 
 
 
 
?
 
Plug into a grounded 3 -prong outlet, do  not remove grounding prong, do  not use an ad apter, and 
do not use an extension cord. 
?
 
Replace all panels before operating . 
?
 
It is recommended that a separate circuit, serving only your appliance  be provided. Use 
receptacles that cannot be turned off by a switch o r pull chain. 
?
 
Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or 
explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of 
this or any other appliance. The fumes can create a fire hazard or explosion. 
?
 
Before proceeding with cleaning and maintenance operations, make sure the power line of the 
unit is disconnected. 
?
 
Do not connect or disconnect the electric plug when your hands are wet. 
?
 
Unplug  the appliance  or disconnect power before cleaning or servicing. Failure to do so can result 
in electrical shock or death. 
?
 
Do not attempt to repair or replace any part of your  appliance unless it is specifically 
recommended in this manual . All other servicing should be referred to a qualified technician. 
 
 
 
 
 
FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL 
?
 
Use two or more people to move and install appliance . Failure to do so can result in back or other 
injury.  
?
 
To ensure proper ventilation for your appliance, the front of the unit must be completely 
unobstructed. Choose a well -ventilated area with temperatures above 60°F (16°C) and below 
90°F (32°C). This unit must be installed in an area protected from the element, such as wind, rain, 
water spray or drips. 
?
 
The  appliance should not be located next to ovens, grills or other sources of high heat. 
?
 
The  appliance must be installed with all electrical, water and drain connections in accordance with 
state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in 
accordance with the National Electrical Code and local codes and ordinances is required. 
?
 
Do not kink or pinch the p ower supply cord of appliance. 
?
 
The  fuse (or circuit breaker) size should be 15 amperes. 
?
 
It is important for the appliance to be leveled in order to work properly. You may need to make 
several adjustments to level it. 
?
 
All installation must be in accordance with local plumbing code requirements. 
?
 
Make certain that the pipes are not pinched or kinked or damaged during installations . 
?
 
Check for leaks after connection. 
?
 
Never allow children to operate, play with or crawl inside the appliance. 
?
 
If you use the drainage container , you must set the drain select switch to OFF or the water can 
overflow from the drainage container 
?
 
Although the unit has been tested at the factory, due to long-term transit and storage, the first 
batch of cubes must be discarded. 
 
?
 
Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may 
damage or discolor the interior. 
?
 
Do not use this a pparatus for other than its intended purpose.