Homesmart Appliance SRS-LYNC-M User Manual
CHAPTER 3
INSTALLING YOUR ROOM SYSTEM’S HARDWARE
INSTALLING YOUR ROOM SYSTEM’S HARDWARE
14
smarttech.com/kb/170450
Task
Ensure the wall can support the weight of the room system.
Room
Weight (lb.)
Weight (kg)
Extra small
151
68.5
Small
254
115.6
Medium
326
148.5
Medium with dual panels
273
124
Large
487
221
Extra large
615
279
NOTES
l
Refer to local building codes to confirm that the wall can support the above
weights.
weights.
l
Refer to the hardware selection guide for the recommended hardware for your wall
type (see
type (see
Choose an appropriate location for the room system:
l
Do not install the room system in a location where a door or gate could hit it.
l
Do not install the room system in an area where it will be subjected to strong
vibrations or dust.
vibrations or dust.
l
Do not install the room system where the main power supply enters the building.
l
Ensure adequate ventilation or provide air conditioning around the room system so
that heat can flow away from the unit and the mounting equipment.
that heat can flow away from the unit and the mounting equipment.
l
If you mount the room system in a recessed area, leave at least 4" (10 cm) of space
between the room system and the recessed walls to enable ventilation and cooling.
between the room system and the recessed walls to enable ventilation and cooling.
l
Ensure the room lighting is adequate for the camera to capture video. To prevent
participants from appearing darkened or shadowed in video, ensure they aren’t
backlit.
participants from appearing darkened or shadowed in video, ensure they aren’t
backlit.
Install the room system so that its center aligns with the center of the meeting room table.
This ensures the meeting room table appears in the center of the camera’s field of view.
This ensures the meeting room table appears in the center of the camera’s field of view.