Homesmart Appliance SRS-LYNC-M User Manual
CHAPTER 6
MAINTAINING YOUR ROOM SYSTEM
MAINTAINING YOUR ROOM SYSTEM
61
smarttech.com/kb/170450
8. Press Calibrate.
The calibration screen appears. This can take a few moments.
NOTE
If the calibration screen doesn’t appear on the selected interactive flat panel, move it to the
selected interactive flat panel by pressing the spacebar on the keyboard or the Orient
button
on the interactive flat panel’s color select module.
9. Press the red target with the tip of an interactive flat panel pen. Hold the tip at the center of
the target until the target turns green, and then lift the pen.
The target moves to the next location.
IMPORTANT
Hold the pen perpendicular to the screen.
NOTE
You can calibrate a target again by pressing the Keyboard button or the Right-click button
on the interactive flat panel’s color select module.
10. Continue pressing targets until the calibration is complete.
A message appears stating that the calibration was successful, and then the orientation screen
appears.
11. Orient the interactive flat panel (see
12. On the console, press OK.
SMART Settings closes.
13. On the console, press Apply & Restart.
The room system restarts.