Emerson PN 51A-499ACL01/rev.K User Manual
Model 499A CL-01
Free Chlorine Sensor
Instruction Sheet
PN 51A-499ACL01/rev.K
September 2010
September 2010
SPECIFICATIONS - SENSOR
Pressure: 0 to 65 psig (0 to 549 kPa abs)
Temperature: 32 to 122°F (0 to 50°C)
Process Connection: 1 inch MNPT
Wetted Parts: Noryl®
1
, Viton®
2
, platinum, polyethersulfone,
polyester, wood, silicone
Type
PN
Wetted Materials
Process Connection
Max.Temperature
Max. Pressure
1-1/2 in. tee
23567-00
CPVC, Buna N
1-1/2 in. socket
122°F (50°C)
65 psig (549 kPa abs)
915240-03
3/4 in. NFPT
2 in. tee
915240-04
PVC, Buna N
1 in. NFPT
120°F (49°C)
60 psig (515 kPa abs)
915240-05
1-1/2 in. NFPT
Low Flow*
24091-00
Polycarbonate/
Compression fitting for
158°F (70°C)
90 psig (722 kPa abs)
polyester, 316SS,
1/4 in. OD tubing
silicone
24091-01 (with
Polycarbonate/
Compression fitting for
158°F (70°C)
90 psig (722 kPa abs)
bubble sweep- polyester, 316SS,
1/4 in. OD tubing
ing nozzle)
silicone
1 Noryl is a registered trademark of General Electric.
2 Viton is a registered trademark of DuPont Performance Elastomers
2 Viton is a registered trademark of DuPont Performance Elastomers
SPECIFICATIONS - FLOW CELLS
For additional information, please visit our website
at www.emersonprocess.com/raihome/liquid/.
CAUTION
Do not exceed pressure and temperature specifications.
Pressure: 65 psig max (549 kPa abs max)
Temperature: 32 to 122°F (0 to 50°C)
Pressure: 65 psig max (549 kPa abs max)
Temperature: 32 to 122°F (0 to 50°C)
CAUTION
SENSOR/PROCESS APPLICATION COMPATIBILITY
The wetted sensor materials may not be compatible
with process com
The wetted sensor materials may not be compatible
with process com
position and operating conditions.
Application compat ibility is entirely the responsibility of
the user.
the user.
* Pressure and temperature specifications for the low flow cell exceed the temperature and pressure specifications for the sensor.