Toshiba 203S User Manual

The original cover can be removed to allow copying of bulky objects.

When enabled, this function may help prevent wasteful use of toner that occurs 
when the document cover/RADF cover is not completely closed.
If the start (

) key is pressed when the document cover/RADF cover is not 

completely closed, "CHECK ORIGINAL" will appear in the display and copying may 
not take place. If copying does not take place, copying can be performed by pressing 
the start (

) key again, however, the scan size set in "CHANGING A TRAY'S 

PAPER SIZE SETTING" (p.19) or "VALID COPY WIDTH" (program number 25) 
(p.57) will be used.
If the document cover/RADF cover is completely closed after "CHECK ORIGINAL" 
appears, copying will take place at the normal size.

When this function is off, if the [Start] key (

) is pressed to make a 

copy with the original cover/RADF cover open, parts outside of the 
original will be copied black.
Even when this function is on, if the [Start] key (

) is pressed twice to 

make a copy with the original cover/RADF cover open, parts outside the 
original may be copied black. To prevent excessive use of toner, make 
sure that the original cover/RADF cover is closed when making a copy.

• Originals that are 5-1/2" x 8-1/2" to 8-1/2" x 14" and 14 lbs. to 24 lbs. 

(56 

g/m

2

 to 90 

g/m

2

) can be used. A maximum of 50 pages can be 

placed at once.

• Straighten curled originals before placing them in the document 

feeder tray. Curled originals may cause misfeeds.

• Place originals horizontally.
• Before placing originals in the document feeder tray, be sure to 

remove any staples or paper clips from them.

• When a copy is made, the edges will not be copied (

image loss

). 

For the image loss, see the "SPECIFICATIONS" (p.82).

• When using the margin shift function, check the position of the 

margins carefully. (p.34)