Intel C50277-001 User Manual
2
Setting Up the Chassis
Intel® Entry Server Chassis SC5275-E User Guide
11
Remove the Access Cover
Observe the safety and ESD precautions at the beginning of this chapter. For ease of installation,
before beginning lay the chassis on its right side, with the left access cover facing up.
before beginning lay the chassis on its right side, with the left access cover facing up.
1. If the shipping screws are installed, remove them (number 1 in the figure below).
2. Slide the thumb latches to the left to the unlocked position (number 2 in the figure).
3. Slide the cover backward a short distance, until it stops (number 3 in the figure).
4. Pull the entire cover upward, straight away from the chassis, to disengage the rows of tabs from
2. Slide the thumb latches to the left to the unlocked position (number 2 in the figure).
3. Slide the cover backward a short distance, until it stops (number 3 in the figure).
4. Pull the entire cover upward, straight away from the chassis, to disengage the rows of tabs from
the notches in the top and bottom edges of the chassis. Set the cover aside.
TP00057
1
1
1
1
2
2
2
2
3
3
Figure 3. Removing the Access Cover