APC AP5615 User Manual

Chapter 3: Basic Operations        17

You can set a screen delay to specify the length of time that elapses between when Print Screen is 
pressed and when the OSD interface starts. 

1.

Press Print Screen to start the OSD interface.

2.

In the Main window, click Setup — Menu.

3.

In the Screen Delay Time field, type the number of seconds you want to elapse between when 
Print Screen is pressed and when the OSD interface starts.

Use the Main window of the OSD to select a target device to connect. When you select a target 
device, the keyboard and mouse are automatically reconfigured to the correct settings for that target 
device.

1.

Press Print Screen to start the OSD. 

2.

Double-click the target device name, eID number or port number in the main window

— or —

The KVM server module is online (green circle).

The KVM server module is offline or is not operating correctly.

The target device is tiered through another KVM switch. The 
target device and the KVM switch are online and have power.

The target device is tiered through another KVM switch. The 
KVM switch is offline or does not have power.

The firmware for the KVM server module is being upgraded 
(yellow circle). When this symbol is visible, do not turn off and 
turn on the KVM switch or connected target devices and do not 
disconnect the KVM server module. Doing so might damage the 
KVM server module permanently.

The KVM server module is being accessed by the indicated 
user channel (green channel letter).

The KVM server module is blocked by the indicated user 
channel (black channel letter). 

A remote virtual media connection is established to the target 
device connected to the indicated user channel (blue letter).