SMC Networks 10/100 User Manual
C
OMMAND
L
INE
I
NTERFACE
3-90
description
Use this command to add a description to an interface. Use the no
form to remove the description.
form to remove the description.
Syntax
description string
no description
no description
string - Comment or a description to help you remember
what is attached to this interface. (Range: 1-64 characters)
what is attached to this interface. (Range: 1-64 characters)
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
The following example adds a description to port 25.
speed-duplex
Use this command to configure the speed and duplex mode of a
given interface when autonegotiation is disabled. Use the no form
to restore the default.
given interface when autonegotiation is disabled. Use the no form
to restore the default.
Syntax
speed-duplex {1000full | 100full | 100half | 10full |
10half}
no speed-duplex
10half}
no speed-duplex
• 1000full - Forces 1000 Mbps full-duplex operation
• 100full - Forces 100 Mbps full-duplex operation
• 100half - Forces 100 Mbps half-duplex operation
• 100half - Forces 100 Mbps half-duplex operation
Console(config)#interface ethernet 1/25
Console(config-if)#description RD-SW#3
Console(config-if)#
Console(config-if)#description RD-SW#3
Console(config-if)#