Hearth & Home Technologies WSK200 User Manual

1

Printed in U.S.A.     Copyright 2007
Hearth & Home Technologies Inc. 
20802 Kensington Boulevard, Lakeville, MN 55044

2050-910G   7/07

The WSK100 and WSK200 wall switches are designed to 
switch the fi replace on or off, and the pilot function activates 
the pilot fl ame as well. These wall switches interface with 
Intellifi re

™

 systems only.

This wall switch is tested and safe when installed in 
accordance with this installation manual. Do not install 
any components that may be damaged. Do not modify, 
disassemble, or substitute any of the components included 
with this kit. Installation of this unit must be done by a 
qualifi ed service technician.

Placement of this wall switch may affect performance. An 
assessment of the space should be done prior to installation 
for optimum performance. See Section 1.1 for location 
recommendations.

NOTE: The electrical junction box provided with the fi replace 
must be wired with 110 VAC before installing this kit. See 
owner’s manual for details.

Shock Risk

Inspect components for damage. Damaged 
parts may impair safe operation.

•  Do NOT install damaged components.
•  Do NOT install incomplete components.
•  Do NOT install substitute components.
Report damaged parts to dealer.

• 

Important installation and operation instruc-

tions included.

• 

Read, understand and follow these 

instructions for safe installation and 
operation.

• 

Leave this manual with party responsible 

for use and operation.

Do NOT provide any power to this unit 
until all wiring is complete. 

•

May destroy parts of this device and 
render it unusable.
May lead to possible electrical shock.

•

NOTE: All wiring should be done by a qualifi ed electrician and 
shall be in compliance with local codes and with the National 
Electric Code ANSI/NFGA No. 70 - current (in the United 
States), or with the current CSA C22.1 CANADIAN ELECTRIC 
CODE (in Canada).