Rose electronic CRV-SRDTXPD1D User Manual

6 

 

CRYSTALVIEW DVI CATx INSTALLATION AND OPERATIONS MANUAL  

 

Please refer to the safety section first before proceeding with any installation 
or configuration of the CrystalView DVI CATX. 
 
When installing the CrystalView DVI CATX, locate the transmitter as close as 
possible to the CPU or switch.  Keep the  cables as short as possible but still 
give some freedom of movement. Using shorter cables keeps the video noise 
to a minimum and reduces installation costs.  You can mount the CrystalView 
DVI CATx in a CPU rack with the optional rack mount kit.  When mounting the 
units in a rack, follow the instructions in Appendix D and Appendix E.  Provide 
adequate air circulation to assure that the maximum operating temperature is 
not exceeded.   
 
Wherever the transmitter and receiver units are located, they should be on a 
secure surface and free from obstructions and objects that may cause 
damage to the units.   
 

 

Figure 1. Typical cabling configurations 

(See Figure 1 for the connector locations for your model) 

 

NOTE: Using the local access model, a second KVM station can be 
 

connected to the transmitter. Damage to the unit can occur if the DVI 

 

connectors are connected incorrectly.  Make sure the DVI connector to 

 

the computer is NOT connected to a DVI monitor. 

 

The serial and audio transmitter connects to the computers serial and 

 

audio ports (Line in / Microphone). 

 
 

LOCAL KVM                                       REMOTE KVM
   ACCESS                                                ACCESS 

TRANSMITTER                                             RECEIVER