Cisco Systems 3200 User Manual

The Cisco 3200 Series routers provides industry-standard network software features that run on 
ruggedized hardware, suitable for harsh environments. A router includes a combination of mobile 
interface cards and a Cisco 3200 Rugged Enclosure. The following major components are available from 
Cisco:

Cisco 3200 Rugged Enclosures

Cisco 3270 Rugged Router card

Mobile Access Router Card (MARC)

Fast Ethernet Switch Mobile Interface Cards (FESMICs)

Serial Mobile Interface Cards (SMICs)

Wireless Mobile Interface Cards (WMICs)

This document describes the Cisco cards and the enclosure solutions that are used to assemble 
Cisco 3200 Series routers. A router can be purchased as a complete unit or purchased in part from Cisco 
and assembled by a qualified system integrator (SI) as a custom solution. For example, a qualified SI 
might assemble cards into a custom enclosure to suit a particular environment. Custom solutions based 
on Cisco cards must include a power source, cables, and an enclosure. For information about the specific 
hardware configuration of your router, contact your SI.

The following chapters provide information that you need for understanding the physical components of 
a completed Cisco 3200 Series router. This document is not intended to cover assembly or repair 
instructions. 

 describes the enclosures that house the Cisco 3200 Series 

routers. 

 describes the Cisco 3270 Rugged Router card layout.

 describes the MARC layout.

 describes the FESMIC layout, ports, and 

buses.

 describes the SMIC layout, ports, and buses.

 describes the WMIC layout, ports, and buses.

 describes how to seal the Smart Serial port. 

 describes how to install and remove small form-factor 

pluggable (SFP) modules on the Cisco 3270 Rugged Router card.