3M 800ab User Manual
20
8.1 Description of the Working Cycle
After having closed the top fl aps of the carton, the
operator pushes it under the top infeed end in order
to avoid the opening of the top fl aps. Further push-
ing causes the two bottom side belts to drive the
box through the taping heads which automatically
seal the top and bottom seams. The carton is then
expelled on the exit conveyor.
operator pushes it under the top infeed end in order
to avoid the opening of the top fl aps. Further push-
ing causes the two bottom side belts to drive the
box through the taping heads which automatically
seal the top and bottom seams. The carton is then
expelled on the exit conveyor.
8.2 Def nition of Running Mode
The case sealer 800ab-NA has only one (automatic)
operating mode with:
operating mode with:
- The EMERGENCY STOP BUTTON unlocked
(Figure 8-1)
- The main switch start switch “ON”
(Figure 8-2)
8.3.1 Normal Stop Procedure
When the main switch is OFF, the machine stops
immediately at any point of the working cycle. The
same thing happens in case of electrical failure or
when the machine is disconnected from the mains.
immediately at any point of the working cycle. The
same thing happens in case of electrical failure or
when the machine is disconnected from the mains.
8.3.2 Emergency Stop
The LATCHING EMERGENCY STOP BUTTON is
located on the top center of the machine
located on the top center of the machine
(Figure 8-1).
8-THEORY OF OPERATION
2010 December
800ab-NA
E-Stop
Location
Belt
Direction
Figure 8-1
Figure 8-2
Figure 8-3