Kodak i30/i40 Leaflet

1. Remove dust and debris from this area by using a Stati-

cide wipe or a small brush. Be careful not to scratch the 

glass when cleaning.

2. Wipe the imaging guide with a Staticide wipe.

IMPORTANT:Staticide wipes contain isopropanol which can 

3. Wipe the imaging guide again with an almost-dry 

Staticide wipe to remove any streaks.

4. Clean the reflector spot using the almost-dry Staticide 

wipe to remove any dust or streaks.

The K Number, Serial Number and Dataplate can be found 

on the bottom of the scanner.
To access the dataplate:

•

Carefully tilt the scanner back until you can see the 
dataplate on the bottom of the scanner.

* Items are subject to change.

EASTMAN KODAK COMPANY
Document Imaging
Rochester, New York 14650

Kodak and Digital Science are trademarks of Eastman Kodak Company.

© Eastman Kodak Company, 2004
A-61526

Kodak i30/i40 Scanners

Imaging guide

Reflector spot

Serial number and

      K number

Dataplate

174 7849

Kodak Feed Module / for i30/i40 
Scanners

853 5981

Kodak Digital Science Roller Cleaning 
Pads (qty 24)

896 5519

Staticide Wipes for Kodak Scanners 
(qty 144)