Epson SCT7270SR User Manual
Epson SureColor T-Series User’s Guide
Maintenance
164
7
Install the new cutter.
Insert the cutter so that the pin on the printer
matches up with the hole on the cutter. Use a
cross-head screwdriver to tighten down the
screw to hold the cutter in place.
matches up with the hole on the cutter. Use a
cross-head screwdriver to tighten down the
screw to hold the cutter in place.
8
After replacing the cutter, press the Z button.
The cutter will return to its original position.
Ready
is displayed in the control panel when the
process is complete.
!
Caution:
Do not store the cutter within the reach of
children. The cutter's blade could cause an
injury. Pay careful attention when replacing
the cutter.
children. The cutter's blade could cause an
injury. Pay careful attention when replacing
the cutter.
c
Important:
Screw up the cutter firmly, otherwise the cut
position may be slightly shifted or skewed.
Screw up the cutter firmly, otherwise the cut
position may be slightly shifted or skewed.