TP-LINK TL-SG2210P/TL-SG2216/TL-SG2424/ TL-SG2424P/TL-SG2452 User Manual

 

42

 

Global Configuration Mode 

Specify the log file synchronization frequency as 10 hours: 

TL-SG2424(config)#logging file flash frequency periodic10 

The  logging file flash level command is used to specify the system log 

message severity level. Messages will a severity level equal to or higher than 

this value will be stored to the flash. To restore to the default level, please use 

no logging file flash level command. 

logging file flash level level 

no logging file flash level 

level —— Severity level of the log message.

There are 8 severity levels marked 

with values 0-7. The smaller value has the higher priority. Only the log with the 

same or smaller severity level value will be saved to the flash. By default, it is 2 

indicating that the log message marked with 0~2 will be saved in the log flash. 

Global Configuration Mode 

Save the log messages with their severities equal or higher than 7 to the flash : 

TL-SG2424(config)#logging file flash level 7 

The clear logging command is used to clear the information in the log buffer 

and log file.