Adaptec 29320A User Manual
8
2
Plug one end of the cable to the 50-pin internal SE Narrow SCSI
connector on the Adaptec SCSI Card 29320A.
connector on the Adaptec SCSI Card 29320A.
3
Plug the other end of the cable to a terminated Ultra/Fast
Narrow SCSI device.
Narrow SCSI device.
4
If you have other Ultra/Fast Narrow SCSI devices, attach them
to the connectors between the two ends of the cable. Be sure
these other devices are unterminated.
to the connectors between the two ends of the cable. Be sure
these other devices are unterminated.
5
Connect a power cable from your computer’s internal power
supply to each internal device.
supply to each internal device.
Connecting External SCSI Devices
You can connect external Ultra320/160 and Ultra2 SCSI devices to
the 68-pin external LVD SCSI connector. Each external device will
require a 68-pin LVD external LVD SCSI cable.
the 68-pin external LVD SCSI connector. Each external device will
require a 68-pin LVD external LVD SCSI cable.
Note:
We recommend that you do not combine older SCSI
devices with the newer Ultra320/160 and Ultra2 SCSI devices
on the same SCSI channel of the Adaptec SCSI Card 29320A.
on the same SCSI channel of the Adaptec SCSI Card 29320A.
Follow these steps to connect your external SCSI devices:
1
Connect one end of an external SCSI cable to one of the external
Ultra320/160 connectors on the Adaptec SCSI Card 29320A.
Ultra320/160 connectors on the Adaptec SCSI Card 29320A.
68-pin external
LVD SCSI connector
LVD SCSI connector
External LVD SCSI
cable
ASC-29320A IG.fm Page 8 Tuesday, July 29, 2003 3:30 PM