Cisco Systems 3522 BRI User Manual
2-10
Installation and Upgrade Guide for Cisco Unified Videoconferencing 3522 BRI Gateway and 3527 PRI Gateway Release 5.5
OL-14910-01
Chapter 2 Setting Up Your Cisco Unified Videoconferencing 3500 Gateway
Connecting the Cisco Unified Videoconferencing 3500 Gateway Unit to the LAN
Connecting the Cisco Unified Videoconferencing 3500 Gateway
Unit to the LAN
Unit to the LAN
This section describes how to connect the Cisco Unified Videoconferencing 3500 Gateway unit to the
Local Area Network (LAN).
Local Area Network (LAN).
Procedure
Step 1
Connect the supplied LAN cable from your network hub to the 10/100BaseT Ethernet port on the front
panel of the Cisco Unified Videoconferencing 3500 Gateway unit. The 10/100BaseT port accepts an
RJ-45 connector.
panel of the Cisco Unified Videoconferencing 3500 Gateway unit. The 10/100BaseT port accepts an
RJ-45 connector.
Step 2
Connect a separate ISDN or serial line to each PRI or BRI port in the rear panel of the Cisco Unified
Videoconferencing 3500 Gateway unit. The port accepts an RJ-45 connector.
Videoconferencing 3500 Gateway unit. The port accepts an RJ-45 connector.
Managing and Monitoring the Cisco Unified
Videoconferencing 3500 Gateway Unit
Videoconferencing 3500 Gateway Unit
You can manage and monitor the Cisco Unified Videoconferencing 3500 Gateway unit locally or from
remote connections. You can also upgrade Cisco Unified Videoconferencing 3500 Gateway software.
remote connections. You can also upgrade Cisco Unified Videoconferencing 3500 Gateway software.
SNMP Management
The Cisco Unified Videoconferencing 3500 Gateway unit is equipped with an SNMP agent. You can
access the Cisco Unified Videoconferencing 3500 Gateway unit using an SNMP management client.
access the Cisco Unified Videoconferencing 3500 Gateway unit using an SNMP management client.
Local Port Monitoring Connections
You should access the Cisco Unified Videoconferencing 3500 Gateway unit using a local port
connection for preliminary configuration and monitoring.
connection for preliminary configuration and monitoring.
Serial Port
The Cisco Unified Videoconferencing 3500 Gateway unit includes a DB-9 serial port connector and an
RJ-45 serial port connector. The DB-9 serial port is used to access the boot sequence menu from a local
PC. Using a terminal emulation application running on the PC, you can assign an IP address and subnet
mask to the Cisco Unified Videoconferencing 3500 Gateway unit.
RJ-45 serial port connector. The DB-9 serial port is used to access the boot sequence menu from a local
PC. Using a terminal emulation application running on the PC, you can assign an IP address and subnet
mask to the Cisco Unified Videoconferencing 3500 Gateway unit.
The RJ-45 serial port is used to connect a PC terminal to the Cisco Unified
Videoconferencing 3500 Gateway unit.
Videoconferencing 3500 Gateway unit.
Note
A special adapter cable for connecting between a standard DB-9 serial cable and the RJ-45 serial port is
supplied with the Cisco Unified Videoconferencing 3500 Gateway unit.
supplied with the Cisco Unified Videoconferencing 3500 Gateway unit.