IBM Dock I User Manual
Screen Messages
Action
195
(The computer in
hibernation mode might
be attached to the Dock I)
be attached to the Dock I)
1.
Turn off the computer.
2.
Remove the computer.
3.
Attach the computer to the Dock I.
Blank screen or any other
screen response
screen response
Go to “LCD Problems” on page 6-12.
Other messages
Go to step 2.
Yes
The computer has successfully completed the POST and the
system programs are loaded. To start the test programs,
select the Test icon, then select the Start icon or press Enter.
system programs are loaded. To start the test programs,
select the Test icon, then select the Start icon or press Enter.
If you cannot go past the first screen, have the system unit
serviced.
If the Dock I stops during testing and does not continue,
have the system unit serviced.
If testing does not find a problem and a problem still exists,
go to the Troubleshooting Charts on page 6-7 and find
the problems.
the problems.
No
If the Easy-Setup menu did not appear, it may have been
caused by one of the following:
caused by one of the following:
Power was incorrectly turned on in step 2.
The external keyboard connector may not be securely
The external keyboard connector may not be securely
connected to the Dock I.
2
Turn off the computer. Press and hold F1, then turn on the
computer.
computer.
3
Did the Easy-Setup menu appear on the screen?
6-6
IBM ThinkPad Dock I User’s Guide
Title: C74AMST CreationDate: 06/23/93 17:09:07