PioneerPOS G24-L User Manual
GPRS
3-280
G24-L AT Commands Reference Manual
April 15, 2008
The +MIPODM command returns a +MIPSTAT <Socket ID><Error> unsolicited event
if it fails. For example, if it was rejected by the remote side.
if it fails. For example, if it was rejected by the remote side.
Command Type
Syntax
Response/Action
Remarks
Set
AT+MIPODM=
<Socket ID>,
<Source Port>,
<Remote IP>,
<Remote Port>,
<Protocol>
OK
or:
+MIPODM: <Socket
ID>,<State>[,<Remote IP>,<Remote
Port>]
Port>]
or:
+MIPSTAT: <Socket ID>,<Status>
or:
ERROR: <err>
The Set command returns
<Remote IP> and
<Remote Port>
parameters only for
sockets opened in Listen
mode.
<Remote IP> and
<Remote Port>
parameters only for
sockets opened in Listen
mode.
Read
AT+MIPODM?
+MIPODM:[<SocketID>]
for each socket that can be opened
or:
+MIPODM 0,0
if there are no free sockets.
When a socket opens in
Online Data Mode, the
command returns actual
Socket ID value and '1'
value (active). G24-L
will be in
pseudo-command mode
for receiving the
command.
Online Data Mode, the
command returns actual
Socket ID value and '1'
value (active). G24-L
will be in
pseudo-command mode
for receiving the
command.
Test
AT+MIPODM=?
+MIPODM: (list of supported
<socket ID>s),(list of supported
<source port>s),(list of
supported<"Destination IP">s),
(list of <destination port>s),(list of
supported <protocol>s)