Thecus Technology Thecus N199 Leaflet

The Storage Menu displays the status of storage devices installed or connected 
to the N199, including disk and RAID information.  

 

From the Storage menu, choose the 
Disks item and the Disk 

Information screen appears. From 
here, you can see various items 

about installed SATA hard disks. 
Blank lines indicate that a SATA hard 

disk is not currently installed.  

 

Slot 2 is reserved for an eSATA hard 
disk. For instructions on how to 
install one, please refer to Chapter 6

. 

 

Installing an eSATA hard disk will erase all data on that disk. This data can not be 
recovered. Please ensure that all contents on the eSATA disk are backed up before 

installing into the N199. 

 

 

Item Description 
Disk Slot 

Indicates disk location. 

Capacity (MB) 

Shows the SATA hard disk capacity. 

Model 

Displays the SATA hard disk model name. 

Firmware 

Shows the SATA hard disk firmware version. 

Status 

Indicates the status of the disk. Can read OK, Warning, or Failed. 

Total  

Shows the total SATA hard disk capacity. 

File System Check 

Click Apply to run a file system check on installed hard disks. 

From the Storage menu, choose the 

RAID item and the RAID 
Information screen appears.  
 

 
 

 
 

 
 

 

Item Description 
RAID Level 

Shows the current RAID configuration. 

Total Capacity 

Shows total capacity of the RAID configuration. 

Status 

Indicates status of the RAID. Can read either Healthy or Failed. 

Used Percentage 

Displays percentage of used RAID capacity. 

Stripe Size* 

Shows the current disk stripe size. 

*(Only with RAID 1 enabled)

 

Remaining Time* 

Indicates time remaining until the RAID is finished building. 

*(Only 

with RAID 1 enabled)

 

 
To configure your RAID settings, press the Config button to go to the RAID 
Configuration screen. 

 

 
 

23