IBM RT-686 User Manual
BIOS Setup
27
BIOS SETUP
Press [Del] at boot up to enter BIOS setup. Use arrow keys to select options and
[PgUp] [PgDn] to modify them. When finished, move to ”Save & Exit Setup”
and press [Enter] then press “Y”.
[PgUp] [PgDn] to modify them. When finished, move to ”Save & Exit Setup”
and press [Enter] then press “Y”.
Main
You may set time, date, HDD, FDD parameters in Main Setup. Set IDE Primary
Master (HDD) and IDE Secondary Master (other IDE devices, such as CD-ROM
drive) as “Auto”. Since the HDD is detected automatically, you usually do not
need to setup its parameters.
Master (HDD) and IDE Secondary Master (other IDE devices, such as CD-ROM
drive) as “Auto”. Since the HDD is detected automatically, you usually do not
need to setup its parameters.
Note: The contents may vary depending on computer configuration.