IBM 755X (9545) User Manual
Symptom/Error
FRU/Action
185
(The startup sequence is
not valid. Suspect that
power was off when the
startup sequence was being
updated.)
(The startup sequence is
not valid. Suspect that
power was off when the
startup sequence was being
updated.)
1. Reset the startup
sequence in
Easy-Setup.
Easy-Setup.
186
1. System Board
188
1. Set the system
identification using
the ThinkPad 750Ce
hardware
maintenance diskette.
the ThinkPad 750Ce
hardware
maintenance diskette.
Note: You can use
this maintenance
diskette for all Models.
this maintenance
diskette for all Models.
190
(Depleted battery pack was
installed when the power
was on.)
(Depleted battery pack was
installed when the power
was on.)
1. Go to “Checking the
Battery Pack” on
page 208.
page 208.
191XX
1. System Board
2. Processor card (370C,
750Ce, 755C, and
755Cs)
755Cs)
195
(The configuration read from
the hibernation area does
not match the actual
configuration.)
(The configuration read from
the hibernation area does
not match the actual
configuration.)
1. Check if the
configuration was
changed.
For example, check if
the disk drive is from
another computer.
changed.
For example, check if
the disk drive is from
another computer.
196
(Read error occurred in the
hibernation area of the
HDD.)
(Read error occurred in the
hibernation area of the
HDD.)
1. Run the hard disk
drive test.
2. Hard Disk Drive
197
(The computer memory size
is not equal to the
hibernation area size on the
HDD.)
(The computer memory size
is not equal to the
hibernation area size on the
HDD.)
1. Have the user disable
then enable
hibernation mode.
hibernation mode.
199XX
1. System Board
1XX
1. System Board
2XX
1. Go to “Memory
Checkout” on
page 201.
page 201.
2. IC DRAM Card, DIMM,
or DIMM Adapter
3. System Board
218
IBM Mobile Systems HMM