IBM 143L User Manual
Note: Signal lines, not used in these steps, are used
for communication between the system and
the battery.
the battery.
3. If the voltage is less than +8 V dc, recharge the
battery pack.
If the voltage is still less than +8 V dc after
recharging, replace the battery.
recharging, replace the battery.
Terminal
Signal / Voltage (V dc)
4
Reserved
5
Thermal
6
Sense
7
Ground
Planar Board Check
The planar board performs processing functions. Thus, the
planar board can cause processor problems. To verify the
problem, do the following:
planar board can cause processor problems. To verify the
problem, do the following:
1. Boot from the diagnostics diskette and start the PC
Doctor program (please refer to “Running the PC
Doctor Diagnostics Program” on page 29).
Doctor Diagnostics Program” on page 29).
2. Run the System Board test to verify the symptom.
This test verifies both the planar board and the CPU
board.
board.
If the tests detect a planar board problem, replace the
planar board.
planar board.
Note: Don't touch the keyboard and pointing device when
the planar board (system board) test is running.
This may cause an unexpected error.
This may cause an unexpected error.
Memory Check
DIMM are available for increasing memory capacity.
DIMM
DIMM
Total Memory
32MB
0MB
32MB
0MB
32MB
32MB
32MB
32MB
64MB
64MB
0MB
64MB
0MB
64MB
64MB
64MB
32MB
96MB
32MB
64MB
96MB
64MB
64MB
128MB
128MB
0MB
128MB
0MB
128MB
128MB
128MB
32MB
160MB
32MB
128MB
160MB
8
ThinkPad i Series 1400