IBM 700X (9552) User Manual

Page of 509
     
 
 
Events that cause entering of hibernation mode:
Ÿ
The hibernation mode is requested by the Fn key
(Fn
+
F12).
Ÿ
Timer conditions are satisfied in suspend mode.
Ÿ
Critical low battery condition.
Event that causes exiting of hibernation mode.
Ÿ
The power-on switch is operated.
When power is turned on, the hibernation history of the
boot record on the hard disk is recognized and system
status is restored from the hard disk to resume operation.
Port Replicator Power Overload:  
If power shut
downs occur intermittently when using PCMCIA-2 devices
via a port replicator, suspect an over-current problem.
Some PCMCIA devices use more power; if the maximum
usage of each device occurs simultaneously, the total
current will exceed the limit, thereby causing a power shut
down. Isolate this problem by removing one of the
devices, and use the computer under the same condition
to see whether a power shut down occurs. Do this
procedure for all devices, then determine the cause. Use
of the larger AC Adapter (50W, optional) is recommended,
if one is not yet in use.
    ThinkPad 355x, 360x, 370C, 750x, 755C, 755Cs
215