Majestic Appliances UV36 User Manual
Vent-Free Gas Fireboxes
Model: UV36
Model: UV36
78647
ADC36-3 cover
2/04
Homeowner’s Installation and
Operating Instructions
INSTALLER: DO NOT DISCARD THIS MANUAL - Leave in fireplace for homeowner.
CFM Specialty Home Products Unvented
Gas Logs VL24MN, VL24MP, VL24RN,
VL24RP, VFL34MN, VFL34MP, VFL34RN,
VFL34RP may be used with this firebox.
(Refer to Page 4)
Gas Logs VL24MN, VL24MP, VL24RN,
VL24RP, VFL34MN, VFL34MP, VFL34RN,
VFL34RP may be used with this firebox.
(Refer to Page 4)
20007446 6/05 Rev. 4
™
410 Admiral Blvd. • Mississauga, Ontario, Canada L5T 2N6 • 905-670-7777
www.majesticproducts.com • www.vermontcastings.com
CFM Specialty Home Products
INSTALLER/CONSUMER
SAFETY INFORMATION
Read and save
these instructions.
This book contains your installation
instructions and should be kept in a
safe place. For you to realize all the
advantages and use of the reliable ser-
vice that has been engineered into your
fireplace, you must carefully follow all of
the instructions contained in this book
regarding installation and operation of
the fireplace.
These instructions should be read care-
fully in their entirety before beginning
installation of the fireplace.
It is suggested that you wear work
gloves and safety glasses to protect
your hands and eyes when installing
your fireplace. NOTE: Authorities having
jurisdiction (i.e. building inspectors, fire
marshals, etc.) should be consulted be-
fore installation to determine the need
to obtain a permit.
When installing the Blower Kit, it is
necessary to bring the power source to
the fireplace before walls are enclosed.
Refer to Blower Kit instructions.
These fireboxes are approved as uni-
versal fireboxes and can be paired
with any ANSI Z21.11.2 approved
vent-free log set. The vent-free log
manufacturer’s instructions - in-
cluding their required dimensional
clearances for firebox size, - must be
followed.
Refer to the manual that is packed with
the log set for operating instructions.
instructions and should be kept in a
safe place. For you to realize all the
advantages and use of the reliable ser-
vice that has been engineered into your
fireplace, you must carefully follow all of
the instructions contained in this book
regarding installation and operation of
the fireplace.
These instructions should be read care-
fully in their entirety before beginning
installation of the fireplace.
It is suggested that you wear work
gloves and safety glasses to protect
your hands and eyes when installing
your fireplace. NOTE: Authorities having
jurisdiction (i.e. building inspectors, fire
marshals, etc.) should be consulted be-
fore installation to determine the need
to obtain a permit.
When installing the Blower Kit, it is
necessary to bring the power source to
the fireplace before walls are enclosed.
Refer to Blower Kit instructions.
These fireboxes are approved as uni-
versal fireboxes and can be paired
with any ANSI Z21.11.2 approved
vent-free log set. The vent-free log
manufacturer’s instructions - in-
cluding their required dimensional
clearances for firebox size, - must be
followed.
Refer to the manual that is packed with
the log set for operating instructions.