Hearth & Home Technologies SFE-ST User Manual
7
Hearth & Home Technologies Inc. • SFE-ST • 4050-510 Rev A •
05/08
3
3
Service Instructions
4
4
Service Parts
3
7
10
8
4
4
2
1
6
5
3
9
1
Viewing Screen
4050-500
2
View Screen Retainer
4050-501
3
Glass Door (each side)
4050-502
4
Refractory (each side)
40505-503
5
Fuel Bed
4050-504
6
Embers LED Assembly
4050-505
7
Projector Assembly
4050-506
8
Power Supply Assembly
4050-507
9
3 Watt LED Bulb
4050-508
10 Receiver
4050-108
n/s Installation Manual
4050-510
n/s Wall Switch
WSK-21
A. Replacing the Light Bulb
This appliance uses a single 12 Volt, 3 Watt, MR-16 LED
bulb.
bulb.
• Turn off power to the unit at the main service panel.
• Remove the glass door by lifting up and in.
• Remove the two screws on the projector basket.
• Rotate the housing down to access the bulb.
• Remove the screws holding the bulb and socket.
• Unplug the bulb from the socket.
• Replace the bulb.
• Re-assemble in the reverse order.
• Remove the glass door by lifting up and in.
• Remove the two screws on the projector basket.
• Rotate the housing down to access the bulb.
• Remove the screws holding the bulb and socket.
• Unplug the bulb from the socket.
• Replace the bulb.
• Re-assemble in the reverse order.
WARNING! Disconnect power at circuit breaker before
attempting any maintenance or cleaning to reduce the
risk of fi re, electrical shock or personal injury.
attempting any maintenance or cleaning to reduce the
risk of fi re, electrical shock or personal injury.
B. Screen Cleaning
During shipment, installation, handling, etc., the screen
surface may collect dust particles; these can be removed
by lightly wiping with a clean, dry cloth.
surface may collect dust particles; these can be removed
by lightly wiping with a clean, dry cloth.
C. Maintenance of Motors
The motors used on the fl ame projector assembly is pre-
lubricated for extended bearing life and requires no further
lubrication.
lubricated for extended bearing life and requires no further
lubrication.