Honeywell VISTA-50PUL User Manual
– 52 –
Trouble Conditions (cont’d)
Power Failure
If the POWER indicator is off, operating power for the system has stopped
and is inoperative. CALL FOR SERVICE IMMEDIATELY. If the POWER
indicator is on, but the message "AC LOSS" is displayed, the Keypad is
operating on battery power only. If only some lights are out on the premises,
check circuit breakers and fuses and reset or replace as necessary. CALL
FOR SERVICE IMMEDIATELY if AC power cannot be restored.
and is inoperative. CALL FOR SERVICE IMMEDIATELY. If the POWER
indicator is on, but the message "AC LOSS" is displayed, the Keypad is
operating on battery power only. If only some lights are out on the premises,
check circuit breakers and fuses and reset or replace as necessary. CALL
FOR SERVICE IMMEDIATELY if AC power cannot be restored.
Non-Alpha Keypad Displays
The following displays will appear on non-alpha keypads when the associated
trouble condition is present:
trouble condition is present:
97 =
CALL
FOR
SERVICE
FC =
COMM
FAILURE
BAT
= SYSTEM LOW BATTERY (if no zone number) or LOW
BATTERY on a zone (if a zone number shows)
CC =
MODEM
COMM
NO AC = AC LOSS
SERVICING INFORMATION
Your local dealer is the person best qualified to service your alarm system.
Arranging some kind of regular service program with him is advisable.
Your local dealer is:
Arranging some kind of regular service program with him is advisable.
Your local dealer is:
Name:
Address:
Phone: