Hitachi VM-3700A User Manual

Page of 81
IDENTIFICATION AND OPERATION OF CONTROLS 
 
30
Diagram of Camera 
"BATTERY" Release Lever 
Releases the battery attached to the video camera/recorder. 
Cassette Holder 
Press "STOP/EJECT" button to open the cassette holder. Be aware of the cassette 
direction when inserting. 
NOTE: Power source must be connected to open the cassette holder. 
"DC IN 9.6V" Jack 
When using the AC adaptor/charger (provided) or the car battery cord (optional), 
connect this jack and the "DC OUTPUT" of the AC adapter/charger or the car's 
cigarette lighter socket. 
Graphics in the Electronic Viewfinder 
"BRIGHT', "COLOR" and "TINT" controls 
Use to adjust the picture color in the viewfinder. See page 39. 
"REC/PAUSE" Button 
This button is used to control the camera/recorder. When the "POWER" switch is set to 
the "CAM" position, pressing this button starts the tape to begin recording. "REC" 
appears in the viewfinder. 
When this button is pressed again, "
" appears instead of  "REC" and the tape stops 
and the camera/recorder enters the record/pause (stand-by) mode. 
NOTE: This button may be also used to display a still picture during the playback mode. 
Power Zoom Switch/ "TRACKING" Control 
• This switch performs zooming electrically. 
  "W": Picture becomes wider gradually. 
  "T": Picture becomes telescopic gradually. 
• Used when playing a tape recorded on another VCR. Adjust for best picture. Ejecting 
the cassette returns the tracking to the normal position. 
Lens Cap Tab 
• Place the lens cap on this tab when you are ready to record a scene. The tab also 
prevents the lens cap from swinging around on its cord. 
Hand Strap 
Adjust to best fit your hand.